Stix Waterborne Bonding Primer 946ml

General Description

Stix® Waterborne Bonding Primer is a premium quality, waterborne,
acrylic urethane primer/sealer with unparalleled adhesion to the
most challenging surfaces, including PVC, Vinyl, Most Plastics,
Glass, Tile, Glazed Block, Glossy Paints, Pre-Coated Siding,
Fiberglass, and Galvanized Metals. Stix is also ideal for use on
plaster, drywall, wood, and non-ferrous metals, where a low ambient
or surface temperature would present a problem for conventional
primers. Offers an extremely hard film when cured. Use it on interior
and exterior surfaces and topcoat with almost any type of coating
including Alkyd, Acrylic Latex, Urethane, Epoxy, and Lacquer
Finishes. Stix levels to a smooth surface and cleans up with soap
and water.

Features

• Strongly Bonds to Glossy
  Surfaces
• Unparalleled Adhesion to
  the Most Challenging
  Surfaces.
• Excellent Holdout
• Soap & Water Clean-up
• Cures as low as 35 °F
  (1.7 °C)

Recommended For

Interior and Exterior surfaces. Drywall, Plaster, Ceiling,
Acoustical Tile, Wood Trim & Doors, Formica, Ceramic Tiles,
Glossy Surfaces, PVC, Most Plastics, Masonry Walls, Wood,
Trim, Shutters, Masonry, Stucco, Concrete, Cement Block,
Galvanized Metal, Aluminum, etc.

Limitations

• Apply when air and surface temperatures are above 35 °F
• Do not apply in direct sunlight or on a hot surface. Avoid rain,
  moisture or high humidity for the first 24 hours of curing
• Not intended for immersion service or continuous water
  contact. Not for below grade applications
• Not recommended for use over polyethylene or polypropylene.
  Stix® must be top coated for exterior use
• Not recommended over Kynar® (and similar finishes) unless
  tested and approved by the buyer
• Not recommended as a whole house exterior primer over wood